All Blog Posts (52)

loss all tv channels Strong SRT3650. sat box

Hi would there be anyone so kind and help me reset an old lady's Strong set box SRT3650. She

bought it new a few years ago. She some how has lost all the channels. She said it was going fine one morning, went out and later in the day turned it on and just got the notice no channels found. After no success of retuning them (even after a factory reset) I have bought it to my house and tried to retune it but still doing the same. It powers up fine and menu displays correctly. It searches…

Continue

Added by kathy Ellison on August 3, 2015 at 17:05 — No Comments

Prime is on and off

We have a  S7090PVR dish tv box, it works great except when Prime cuts out and all other channels work. The message that comes across the screen reads; NO RECEPTION CHECK YOUR CABLE OR DISH.

I have the lateset firmware, have re-tuned several times, in the various ways and it has not resolved the issue. What else can I do?

Please help

Added by Jane Gillan on July 15, 2015 at 17:51 — 1 Comment

NHK live from Japan is now on one of Mainland TVs 8 digital TV channels across the Nelson Tasman regions

NHK live from Japan is now on one of Mainland TVs 8 digital TV channels across the Nelson - Tasman regions

Added by Mainland TV Nelson NZ on April 1, 2015 at 21:00 — No Comments

Sommet Sport Fights Back

About Sommet Strikes Back

Project 2015-02-04 13:33:02 +1300

On 12 December we thought the Sommet Sports dream to have free access to sports for kiwis was over. But thanks to the overwhelming support and determination from our viewers, it seems that might not be the case. We're getting ready to strike back, better than ever, with our crowd.

 

Before we…

Continue

Added by Jo Marshall on February 14, 2015 at 10:06 — 1 Comment

no signal — our long experience

The 'no signal' rectangle appears on our TV more and more often. We have had  the Zinwell 7500 box that cost more than the TV for nearly 3 years, with very slight use.  It had to replace our first box that started not working after less than 1 year's use.

Weather conditions do not cause it. Aerial configuration etc has been checked. There appears no rhyme or reason. It gets worse and worse becoming virtually unusable due to the frequency of 'no signal '.

The graph at screen…

Continue

Added by jacqueline scott on January 16, 2015 at 15:55 — 4 Comments

Dish TV T1020

I would just like to thank Dish TV NZ. I have been using  a UHF T1020 for approx 18 months when it stopped working. I sent the unit back to Dish TV to see if it was worth repairing. About three days later my T1020 was returned to me with a invoice for testing and replacement of a power supply component. The invoice had NO CHARGE.

Thanks Dish TV great support.

Mark

Added by Mark on December 14, 2014 at 10:13 — 1 Comment

Still freezing up

Still freezing up

Added by Jackie on May 29, 2014 at 6:02 — No Comments

Sports channel

I am in Waitomo district and for the life of me i cannot get the sports channel on freeview, its supposed to be on the channel which was trackside and i could get that.  any ideas

Added by Shelley Margaret Donald on May 28, 2014 at 13:42 — 5 Comments

Wits End :-(

Hi there, I'm really hoping someone out there can help me. I have just moved into a new flat and have been trying to get the TV up and running for days now. I have 2 aerial cords coming out of the wall in lounge, 1 black and 1 white, the first problem is I do not know which to use, I am in a lower flat under a house and there is are both terrestrial aerial and a satellite dish outside, the landlord upstairs has no idea. I have a Sony TV (2011)and have brought a Veon FreeView box (satellite)…

Continue

Added by Fiona Williamson on May 27, 2014 at 18:47 — No Comments

Masterton Area Freeview Reception Loss

A mains power outage at the Freeview transmitter site serving the Masterton area has caused loss of all DTT services.  Technicians are responding, but weather conditions may cause delays to site access and ongoing investigations.

Added by Keith Salter on May 23, 2014 at 21:51 — 5 Comments

TV1,TV2, TV3 gone - again

Since the changes on the 1st May I have retuned my TV, and WAS getting all channels.  Today I am no longer getting TV1, TV2 & TV3.  Have tried retuning, does not work those channels no longer being picked up at all.

Is there a problem with the network in West Auckland?

Added by Mary on May 6, 2014 at 11:13 — No Comments

A lost hills remote

My freeview model number is HSMX-200

News Flash

All good now my better half contacted freeview and a remote will be sent too me post haste

Cheers Dave.

Added by David paul Journee on April 17, 2014 at 14:39 — No Comments

Where would i be able to purchase a hills remote.

I lost my remote due to many shifts,and i haven't yet set up my freeview TV,i live in Christchurch now,

Would anyone know where i could purchase a new one.

Many Thanks Dave Journee

Added by David paul Journee on April 17, 2014 at 14:09 — No Comments

lost channels

In Auckland and lost channels 1,2 prime plus a few others. They dont  reinstall. Any suggestions.

Thanks Mark

Added by mark on April 7, 2014 at 16:27 — No Comments

starview remote

ops that code for the type of decoder is 52828 there is not a 2 at the end,so lets get rid of that confusion.

Added by sandra jacks on March 18, 2014 at 9:59 — No Comments

all new prime channel

Hi my father has a starview decoder 528282 can any one help me with how to re install the prime channel in for him.

Added by sandra jacks on March 18, 2014 at 9:58 — No Comments

play back stopped

why when i replay a recording back it comes up play back stopped near the end of programme

Added by ashley sievers on February 2, 2014 at 11:56 — No Comments

Can't Get Coloyr on my freeview ! Help!

I set up my freeview with Satellite and get all the channels and sound but no colour, the dvd player plays fine with colour and so does the harddrive so it must be a setting. Can anyone please help

Added by Kristal Frauendorf on December 4, 2013 at 9:48 — 1 Comment

Loss of TV signal during daylight hours

hello fellow Freeviewers,

Since retuning both my Zinwell satelite receivers, I have been experiencing a loss of television signal during daylight hours, and moreso in particular when it is very bright and sunny.…

Continue

Added by Jonathan Buck on November 22, 2013 at 11:51 — No Comments

SATMAX plus S1612

SATMAX supplied very easy to follow instructions for updating the S1612 box to retune and receive Prime on their new broadcasting setting.Retune%20SATMAX%20S1612.docx

Added by Austin Hutcheon on November 5, 2013 at 11:54 — 2 Comments

NETWORK STATUS ALERTS

See Network Status page for updates.

Freeview On Demand Changes Read More Here

Quick Links

© 2024   Created by Bel @ Freeview.   Powered by

Badges  |  Report an Issue  |  Terms of Service