Switching from T-Box to Freeview Sat - no signal
Hey all,
I bought a Samsung Hybrid TV over the weekend with the intention of ditching the Vodafobe T-Box and switching to Freeview Sat. I don't have an aerial but I do have the dish. With the T-Box, I can get every single channel without any issue but when I unplug the dish cable and plug it into the TV, it can't find any signal whatsoever.
I'm really stumped on this. I have found older threads that recommended changing the settings but nothing I have tried has registered ANY signal at all. However, plug it back into the T-box and everything works just fine. The LNB is one of the Sky quad ones like this:
http://www.legiontv.co.nz/downloads/Quad-LNB.jpg
TV = Samsung UA55KU7000SXNZ
Does anyone have any ideas?
Thanks
Luke
Replies to This Discussion
-
Permalink Reply by Satellite Networks Motueka on
-
Make sure the LNB settings on the TV are set to 10750. they usually default to 11300
-
Permalink Reply by John Baird on
-
The Vodafone box is not connected to the dish
-
-
Thats why i said make sure the LNB settings are correct on the hybrid TV. I take it you have the dish connected to the satellite input on the TV
-
-
I think this is what I just realised! Vodafone signals comes via cable. I will trya nd figure out where the lead from the dish is going
John Baird said:The Vodafone box is not connected to the dish
-
-
"but when I unplug the dish cable and plug it into the TV, it can't find any signal whatsoever"
He is connecting the cable from the Vodafone network to his Tv, not the dish
-
-
Ok, got this sorted. After switching to the correct dish cable, I found at dodgy connection at the LNB. Now has great pictures - Thanks for all the advice
NETWORK STATUS ALERTS
See Network Status page for updates.
Freeview On Demand Changes Read More Here
Latest Activity
Quick Links
© 2024 Created by Bel @ Freeview.
Powered by
