Replies to This Discussion

Permalink Reply by Biggles on February 10, 2016 at 18:58

You should have no problem receiving Freeview with any Satellite box provided all the parameters are set correctly. If Sky was working OK then logically there is nothing wrong with the dish and cable but probably an error in your setup parameters.

See page 11 & 12 in your manual and tell us what parameters you have set.

One common reason for no reception is the LNB frequency. Make sure the LNB frequency in setup matches the frequency marked on the LNB.

• ▶ Reply

Permalink Reply by willis on February 11, 2016 at 1:36

generally 10750 or 11300

• ▶ Reply

Permalink Reply by Jan Broadley on February 11, 2016 at 17:28

Thank you Biggles and willis.

So I'm in the Tuning Wizard section - do I Blind Scan or Satellite Scan?

The LNB frequency is different depending on which one I select.

Do I need to select all the parameters? LNB, DiSEqC, Tone switch and Positioner?

• ▶ Reply

Permalink Reply by Biggles on February 11, 2016 at 18:28

Try a Blind Scan for FTA channels. Set LNB to 10750 and if that doesn't work try 11300.

You shouldn't need to alter any other parameters.

If you can access the dish on the roof have a look at the LNB. The frequency should be labeled on the side or back.

• ▶ Reply

▶ Reply to Discussion