Replies to This Discussion

Permalink Reply by lil on January 17, 2015 at 20:41

Can I get help with manual installation for

Frequency - 

Symbol Rate -

Polarzation - 

Modulation - 

‘Sharp’ Sky Dual LNB – 10750 L.O. (I think, looks like it.

and or anything else I should know. I did a factory reset, but can't find any channels

Should I be using this guide to try and find channels?

The reason why I lost all channels was because I followed this guide and kept getting prime channels/animal channel etc....

• ▶ Reply

Permalink Reply by Biggles on January 17, 2015 at 21:39

Have a look here.

http://freeviewforum.co.nz/forum/topics/new-satellite-program-groups

and here

http://www.lyngsat.com/Optus-D1.html

It might help.

• ▶ Reply

Permalink Reply by lil on January 17, 2015 at 21:42

:oP didn't see your post, lol, have 12 tabs up right now, lol

Yep have that up in my tab

so it looks like I have to add these .... will give it a go.  installation add sat/ tp edit....hope thats right

• ▶ Reply

Permalink Reply by lil on January 17, 2015 at 21:55

Ye Gad!!!!! Mr Biggles ..... We have contact ..... Welcome back TVNZ....and to you sir, Good Show.... what!!!!

Solved.

• ▶ Reply

Permalink Reply by lil on January 17, 2015 at 22:23

Well I seem to have tripples of each channel, is there anyway to get rid of tripples

ch 1 maori television

ch 2 tv1

ch 3 tv2

ch 4 tv one plus 1

ch 5 tv2+1

ch 6 tv 1

ch 7 tv 1

ch 8 tv 1

ch 9 tv3

ch 10 tv 3

ch 11 tv 3

ch 12 tv3

goes on like this for ages what did I do wrong I entered all the groups.

OptusD1(160E) Ku

DVB-S 12483Mhz 22500sps H    Group 1

-----------------------------------------------------------

TV ONE                         Freeview

TV2                               Freeview

Maori Television           Freeview

TV ONE plus 1              Freeview

TV2+1                          Freeview-

----------------------------------------------------------

DVB-S 12456Mhz 22500sps H    Group 2

------------------------------------------------------------

TV3                              Freeview

FOUR                           Freeview

TV3 PLUS1                    Freeview

Choice TV                   Freeview

Parliament TV             Freeview

CUE                            Freeview

Te Reo                        Freeview

Shine TV                      Freeview

------------------------------------------------------------

DVB-S 12644Mhz 22500sps H    Group 3

------------------------------------------------------------

The Edge TV                   SKY/FTA *NEW*

FOUR PLUS1                    SKY/FTA *NEW* 

------------------------------------------------------------

DVB-S 12707Mhz 22500sps H    Group 4

------------------------------------------------------------

Prime                           SKY/FTA

------------------------------------------------------------

• ▶ Reply

Permalink Reply by lil on January 18, 2015 at 1:18

--------Solved--------

although I got duplicate channels, I found out I could rearrange the order. Whew.... so much googling these last couple of days.

• ▶ Reply

Permalink Reply by Sara Brown on January 19, 2015 at 20:35

Hi, I have the same problem and are based in Tauranga.

Sorry following the thread is a bit hard to follow - could you confirm what you did to acutally solve the issues?

I wanna watch shortland st!

• ▶ Reply

Permalink Reply by lil on January 20, 2015 at 18:47

I don't have an "approved" unit Sarah. My DTSV remote got lost/broken....  I got a Topfield and had to enter my own codes manually from here....http://freeviewforum.co.nz/forum/topics/new-satellite-program-groups  Not like the DTSV which does it auto for you.

My question to freeview, is ...why is topfield not an approved unit???

• ▶ Reply

Permalink Reply by forumuser on January 20, 2015 at 20:47

Hi Guys,

It looks like some of you have received a SKY feed of TV2 and not Freeview's own TV2 feed. apparently SKY made some broadcast changes which has had minor effects on their own customers however I cannot confirm if this has applied to Freeview non-approved viewers (Freeview viewers who are using non-approved equipment) 

If you have lost only one or two channels, I suggest rescanning the receiver or making a blind scan to pick up lost channels , the rescanned channels may appear on the bottom of your channel list, not on the correct EPG Allocation.

• ▶ Reply

▶ Reply to Discussion