Replies to This Discussion

Permalink Reply by Paul on July 9, 2016 at 17:35

Hi Maria

Update for Prime is available here

http://www.westronics.co.nz/

Update instructions for the Ultraplus 700 or 720
Put the USB stick (with the new channel file on it) in to the USB port on the front of
the Ultraplus 700 or 720
Wait until you are asked to press the red button (usually only 10 seconds)
The unit will then reboot and you will have the update
**** If you get the no signal message press the SAT button on the remote and go
down the list until the signal appears ****

Channel Update here

http://www.westronics.co.nz/720%20Channels.fdu

• ▶ Reply

Permalink Reply by Maria Sherwood on July 9, 2016 at 17:44

I will see if I can understand it, thanks.

• ▶ Reply

Permalink Reply by Maria Sherwood on July 9, 2016 at 17:48

Paul said:

Hi Maria

Update for Prime is available here

http://www.westronics.co.nz/

• ▶ Reply

Permalink Reply by Paul on July 9, 2016 at 18:04

I have attached a PDF version of your manual  below.

Attachments:

• UP720HDMI_PVR_usermanual.pdf, 1.9 MB

• ▶ Reply

▶ Reply to Discussion