TOPFIELD TF6000Fe Box

Is anyone able to help with resetting Prime please, I have followed the instructions here but that doesn't seemed to have helped.
After the search at the above link the number 22 showed alongside Prime, if that is any help.

Thanks very much. :-)

Did this help? Click to mark!

0 members promoted this

Replies are closed for this discussion.

Replies to This Discussion

Permalink Reply by Taylor on June 19, 2016 at 15:42

Not sure why I can't post my own thread, but yes, I have a topfield as well and need help tuning for Prime as well. Thanks

Permalink Reply by Taylor on June 19, 2016 at 15:49

found this......http://freeviewforum.co.nz/forum/topics/photo-guide-how-to-receive-...

Permalink Reply by forumuser on June 19, 2016 at 15:50

That link takes you to the Dish TV website, which isn't related to "Topfield"

Have you looked through these discussions here: http://freeviewforum.co.nz/forum/categories/tune-into-prime-four-pl...

Rregards, Josh

Permalink Reply by Taylor on June 19, 2016 at 16:05

Heres the instruction. Just follow the prompt. I got it from you link....

Permalink Reply by Taylor on June 19, 2016 at 16:07

Josh Hill said:

That link takes you to the Dish TV website, which isn't related to "Topfield"

Have you looked through these discussions here: http://freeviewforum.co.nz/forum/categories/tune-into-prime-four-pl...

Rregards, Josh

Just followed the steps on the post I found on here, hope thats ok, running now

Permalink Reply by Taylor on June 19, 2016 at 16:11

Blast ... didn't work, stilll need prime.... sigh.... other freewview box has it, dstv, but not my freeview.

Permalink Reply by Steve Corbett on June 20, 2016 at 9:37

Thanks for the answers team, I now have Prime, I am not sure if this made any difference but I followed these steps which are similar to the link I posted originally, I then clicked through every channel using the remote and Prime showed up on number "84" on the remote, whether that number would be standard is beyond me, all the best.

Cheers team :-)

Permalink Reply by Taylor on June 21, 2016 at 17:40

Thanks steve, gonna try now, I know with the topfeilds you can move the channels to where ever you want.

Permalink Reply by Taylor on June 21, 2016 at 17:52

I used oranizing SVC/FAVV under installation to move my channels to where I want them. Just click on move then use he arrows to select the channels you want to move to what slot. Good luck