more problems .

so, ive purchased another second hand freeveiw (dish s7070r ) a new lnbf unit and all new cable with fitting already madeup yet after re setting my dish at the prescribed angles and (im sure) following all instructions im still unable to get a signal. any advice please

Did this help? Click to mark!

0 members promoted this

▶ Reply to This

Replies to This Discussion

Dish TVPermalink Reply by Dish TV Support on March 1, 2016 at 14:58

Hi Peter, have you checked out the useful resources found here:

Let us know if you have tried everything and still having issues with the signal.

Regards
Dish TV Online Support

▶ Reply

Permalink Reply by peter h tredo on March 1, 2016 at 18:24

just been and rechecked thing and tryed another scan , same results as before . Have tried both network and blind scans .no luck

▶ Reply

Permalink Reply by Satellite Networks Motueka on March 4, 2016 at 15:21

Those prescribed angles you talk about are a guide only and should be used as a starting point. Unlike an aerial the dish needs to be firmly mounted and pointed with pin point accuracy at the correct satellite. Have you tried getting a professional in. They have all the knowledge and equipment to do the job properly.

▶ Reply

Permalink Reply by Gary J on March 8, 2016 at 15:22

u may have to check the lnb settings. check the one in the dish u brought something along the lines of 11300 or 10750 and change settings in the STB to match