i am trying to help my 85 year old Dad with his freeview set up. He currently has a panasonic analog tv connected to a freeview Sat Box and it working fine through AV3. he also has Panasonic DVD DMR-EH50 recorder which to me does not appear to be connected to the sat box only the tv by yellow, red, white, component cables. the tv is connected to the sat box also by the same type of cables. so am i correct in assuming the dvd mst be connected to the sat box as well as the tv in order to record? ( it currently only records static) if so my question is what type of cable should i use. i have tryed coaxial cable and the DVD still only records static. the only vacant connections left on the sat box are red blue and green component, and SPDIF. The dvd has the same red blue and green, and the coaxial, and large multi pin connections labeled AV1 and AV1 decoder. i have taken pictures of the rear of the setup and attached.

Views: 3182

Attachments:

Replies are closed for this discussion.

Replies to This Discussion

The easiest way to connect the Sat box to the DVD recorder is via a RF cable.

Connect the (RF Out) on the Sat box to the (RF IN) on the DVD recorder.

Then go into the installation menu on the DVD recorder and scan for the sat boxs frequency , this is done the same way as you would tune in the the old analogue signals.

i have tried this Paul RF cable is a coaxial cable isint it? when i did this its still reords static only.

Yes  coaxial is a  RF cable.

You need to have the recorder on the right channel to record from the satbox.

I have that Sat box (DishTV S7070r) connecting to a DMR- EH58 exactly like this.

Are you aware that you can use the Sat box (DishTV S7070r) to record to a Flash drive or external hard drive ?

IMO RF may be the easiest but not the best way. Usually results in a terrible picture quality.

I would connect the Sat Box to the Tv using component cables (red, green blue, red, white) and to the DVD via the composite (yellow red, white) cables. This will give best available picture on the TV. The recorder will need to be selected to AV input to record (and to see on the TV what's being recorded). The Recorder should remain connected to the TV via the composite (yellow, red, white) cables.

P.S. Just looked at your picture and I see there's only one set of red and white audio out on the Sat box. In the setup I describe you would have to use adaptors or y-leads to get 2 of each.

Satellite via any connection looks terrible ;)

Did you note that the Sat box only has 1 set of audio outputs , they could use a splitter on the left and right audio outs tho.

Your also assuming that the TV has component inputs.



Biggles said:

IMO RF may be the easiest but not the best way. Usually results in a terrible picture quality.

I would connect the Sat Box to the Tv using component cables (red, green blue, red, white) and to the DVD via the composite (yellow red, white) cables. This will give best available picture on the TV. The recorder will need to be selected to AV input to record (and to see on the TV what's being recorded). The Recorder should remain connected to the TV via the composite (yellow, red, white) cables.

t

Biggles said:

IMO RF may be the easiest but not the best way. Usually results in a terrible picture quality.

I would connect the Sat Box to the Tv using component cables (red, green blue, red, white) and to the DVD via the composite (yellow red, white) cables. This will give best available picture on the TV. The recorder will need to be selected to AV input to record (and to see on the TV what's being recorded). The Recorder should remain connected to the TV via the composite (yellow, red, white) cables.

thanks to you both for your replies. i will try both options and see how i go.


Christine Goldberg said:
thanks to you both for your replies. i will try both options and see how i go.
i have left them connected with the RF cable and tryed to retune the DVD however all channels will now only tune to channel 22 . It will now however record the one tuned channel, but any ideas how i get it to tune the other channels into something other than 22??

That's correct. It will only tune the one channel which is the output channel of the sat box. To change channels for recording you need to change the channel on the sat box.

thank you so much for your help, it is all working fine now and my Dad is happy :)

RSS

NETWORK STATUS ALERTS

See Network Status page for updates.

Freeview On Demand Changes Read More Here

Quick Links

© 2024   Created by Bel @ Freeview.   Powered by

Badges  |  Report an Issue  |  Terms of Service