A few months back there was a retune needed for Maori TV  & Te Reo, but over the last couple of weeks these two channels seems to have disappeared from Wairarapa TVs again (when using a UHF aerial). Does anybody have any information about this?

Views: 253

Reply to This

Replies to This Discussion

I live in Carterton and about a month or two ago I also noticed that I no longer get Maori TV and The Te Reo channels.

Every other channel has a perfect signal.

An Auto re-tune, then a factory reset and another re-tune still won't bring them back.

Try a manual tune on Channel 39 and/or 38 depending on your location.


You may also find your auto-tune has found them but allocated them a LCN of 800 or higher instead of their normal LCN numbers. I seem to remember that with my Panasonic I had to do a manual tune and rearrange the logical channel numbers. The FW doesn't allow for correct tuning of the new MUX.


I also can't get Maori TV & Te Reo channels, after a full re-tune.

I have emailed a contact at jda, who are responsible for the Wairarapa transmission, pointing them to this thread.

I will report back if there is anything to report.

We are looking into this.

 Warren Harding


Reply to Discussion


Latest Activity

Tony Bowen replied to Tony Bowen's discussion satellite receiver stopped working
"Thanks Willis. I tried this and got the same result. Then I checked the LNB to find the plastic…"
willis replied to Tony Bowen's discussion satellite receiver stopped working
"See if it will switch on with the satellite cable unplugged If so then cable/ lnb suspect If not…"
clifford c wright replied to clifford c wright's discussion missing tv1,tv2, duke on freeview.
Tony Bowen posted a discussion

satellite receiver stopped working

Is it time for a new receiver? My Strong SRT 4300 Digital Satellite Receiver has stopped working…See More

Connect With Us!

© 2018   Created by Bel @ Freeview.   Powered by

Badges  |  Report an Issue  |  Terms of Service