All Pages (84)

TV3 de-regionalisation

From Monday 4 July, MediaWorks stopped broadcasting regional versions of TV3.   This change will remove transmission complexity on satellite and improve the bit rate and video quality of TV3 pro… View »

FREQUENTLY ASKED QUESTIONS

PRIME / FOUR plus 1 / THE EDGE TV UPDATED 25 MAY 2016 Why do I see a message onscreen? Why are these channels moving? For recorders, will Series Links need to be reset? Why didn’t my approved device… View »

Rescan on Hills HSMX-200 5 Comments

Thanks to Paul & Graham for providing these instructions. You will need to use your Hills Remote. Please check your LNB Settings before you proceed (instructions differ depending o… View »

Rescan on Zinwell ZMX 7500 & DSE 7500

You will be using your Zinwell Remote Control, If you don’t have your remote anymore, please contact Zinwell for a replacement, call 0800 946 9355 or email support@zinwell.co.nz These instructions as… View »

Rescan on Panasonic Hybrid TV

You will be using your PANASONIC Remote Control, If you don’t have your remote anymore, please contact PANASONIC for a replacement, call 0800 726 222 or go to PANASONIC Support online, www.panasonic.… View »

Rescan on LG Hybrid TV

You will be using your LG Remote Control, If you don’t have your remote anymore, please contact LG for a replacement, call 0800 542 273 or go to LG Support online, www.lg.com/nz   The following… View »

Rescan on Samsung Hybrid TV

You will be using your SAMSUNG Remote Control, If you don’t have your remote anymore, please contact SAMSUNG for a replacement, call 0800 726 786 or go to SAMSUNG Support online, www.samsung.com/nz/s… View »

Rescan on satBox S8200

The following instructions are supplied by the manufacturer and extracted from the Dish TV website. With some channels being transmitted on a Sky transponder, the satBox S2800 may need a rescan… View »

Rescan on Dish TV S7080

There are two ways to update your S7080: with a Firmware Update or through a Manual Update. FIRMWARE UPDATE DISH TV will be releasing a firmware update ver 1.0B which will be broadcast over the air t… View »

Rescan on Zygo S2000

The following instructions are supplied by the manufacturer and extracted from the Dish TV website. With some channels being transmitted on a Sky transponder, the Zygo S2000 may need a rescan to… View »

RSS

Latest Activity

Scott Brown posted a discussion

Help! Satbox S8200 Bootlooping

Can anyone tell me if there is a cure for a Satbox  that suddenly takes hours to boot, then loads…See More
yesterday
Russell Clarke replied to Russell Clarke's discussion Samsung 55" Ultra HD 4K Smart LED Television
"Its already all connected, it seems odd that the FV app is so picky as to require a specific…"
Saturday
david adamson posted a discussion

Prime tv and other channels gone

First symptom was Parliament TV turning up on the Choice T channel.  Could not tune in Choice TV…See More
Friday
Peter Vickery posted a blog post
Sep 14

Connect With Us!

© 2018   Created by Bel @ Freeview.   Powered by

Badges  |  Report an Issue  |  Terms of Service