Has anyone had this issue.   I have bought a new Dish TV satellite dish and put it up.  I set both the angles as in the instructions,  and used the satellite finder to get the best reception.  I tried to use the auto tuning part after a factory reset with country new Zealand and I live in Tamaranui so I tried Waikato, TAUPO and  Wanganui but with no luck. I tried a blind scan and got the Optus D1 signal strong at 82% and quality at 97%  Problem is the optus D1 will not locate anything on 12546 or 12483. The strong signal I have is on 10692 which gives me some Australian and other overseas channels. Does anyone have a fix for this issue?

Views: 778

Reply to This

Replies to This Discussion

you're on either optus d2@152 degrees or Intelsat 19 @ 166 degrees

As Willis said. You're pointing at the wrong satellite.

Hi Peter, 

Please check out this resource to find the Satellite with Freeview Channels

https://freeviewforum.co.nz/forum/topics/freeview-satellite-alignin...

Thanks everyone, have got it sorted, yes a slight adjustment of the dish to pick up the Optus D1 satellite and not D2 fixed the problem

Reply to Discussion

RSS

© 2021   Created by Bel @ Freeview.   Powered by

Badges  |  Report an Issue  |  Terms of Service