Replies to This Discussion

Permalink Reply by forumuser on February 18, 2020 at 13:24

Hi, Have you tried a factory reset and start again? This usually should resolve any issues with signal. If the issue still persists then let me know and we can troubleshoot further. 

Regards, Josh

• ▶ Reply

Permalink Reply by Parmod Kankarwal on February 18, 2020 at 16:34

Hi Josh, I have tried resetting to factory setting, using 0000, then tried blind scan or normal scan, but still no signal, no coverage,
Many thanks
Parmod

• ▶ Reply

Permalink Reply by Satellite Networks Motueka on February 18, 2020 at 16:41

Firstly you'll need to use your sky dish on a sat box, UHF won't work. If you've scanned and still have no channels there's got to be something faulty and you will have to go through the process of elimination. maybe just try plugging your UHF aerial straight into your TV  and scan on digital.

• ▶ Reply

Permalink Reply by forumuser on February 19, 2020 at 7:36

Hi Parmod

ditto above. You will need to use the correct cable for the correct input. if you are stuck, please let me know. You can always post through photos if you are unsure and we can troubleshoot from there. 

Josh

• ▶ Reply

▶ Reply to Discussion