Hi everyone,
I cancelled sky a little while back before we went on holiday. Have just got back and the 28 day notice period ended while we were away. I meant to sort a freeview solution before I left but didn't now we have no TV, only Netflix, lightbox etc. I don't care but everyone else is losing it. I am looking for the best option to replicate the set up we had with sky which was decoder in 1 room, modulator sending signal to second room. It looks like the S8200 would be almost a direct plug and play swap but it's Sat based so no HD. Is it possible to get a terrestrial receiver ( we have uhf) and then send that picture to the second tv without that second tv needing it's own separate freeview receiver? The second tv is an older plasma screen with no HD so I don't much care about the quality, I just want to send the picture to it.

Thanks in advance for your suggestions and help
Stephen

Views: 671

Reply to This

Replies to This Discussion

A 2nd receiver for the 2nd tv only $60-$70 would be much less hassel than trying to feed off another receiver.

Thanks nzdtv, so I could just use a splitter to direct the uhf signal to the second room and through the second receiver? All the coax is in the wall

Is your Primary TV a Freeview Model? If so just plug in a UHF antenna and get a new STB plus splitter for the other TV.

If both TV are non Freeview then you could use the Sky Modulator (if it was external and you kept it) to send signal from a new UHF STB to the other room via the modulator while using HDMI cable to the main TV.

Other option for 2 non-freeview TV is 2 STB and UHF splitter as NZDTV suggests.

You could also consider new TVs of course.

Thanks Biggles, looks like I have options which is the main thing.  Neither is Freeview. Primary TV is a 2 year old Sony. Yes I still have the modulator so I might try that option first since it uses stuff I already have. The modulator is/was set to CH38, do I need to Monkey with that?

Finally, I have been told that our aerial is a combo uhf/vhf. Never been used as we have had sky since we built the house about 8 years ago so haven't tested it. Have attached a picture, anyone have any thoughts on if it is indeed a combo?



Biggles said:

Is your Primary TV a Freeview Model? If so just plug in a UHF antenna and get a new STB plus splitter for the other TV.

If both TV are non Freeview then you could use the Sky Modulator (if it was external and you kept it) to send signal from a new UHF STB to the other room via the modulator while using HDMI cable to the main TV.

Other option for 2 non-freeview TV is 2 STB and UHF splitter as NZDTV suggests.

You could also consider new TVs of course.

OK. The antenna actually seems to be a High Band/Low Band VHF, not VHF/UHF and may or may not work OK. Try it and see.  If your Sony TV is only 2 years old then it must be a Freeview model. They've all had Freeview built in since about 2010. What model is it? Just plug in the antenna and try Autotune.

Don't tinker with the modulator. Just plug in the A/V leads from a STB to where the Sky leads were plugged in and it should work. The TV in the other room is already tuned to it.

Thank you thank you thank you!! So I just whipped out an old coax cable plugged it into the wall and the back of the tv, hit auto tune and now I have crystal clear HDTV!!! Freeview is built in even though I was told by the retailer at the time it didn't (I asked specifically). Up and running and hasn't cost me a cent. 

Biggles said:

OK. The antenna actually seems to be a High Band/Low Band VHF, not VHF/UHF and may or may not work OK. Try it and see.  If your Sony TV is only 2 years old then it must be a Freeview model. They've all had Freeview built in since about 2010. What model is it? Just plug in the antenna and try Autotune.

Don't tinker with the modulator. Just plug in the A/V leads from a STB to where the Sky leads were plugged in and it should work. The TV in the other room is already tuned to it.

Don't you just love it when a plan comes together!!

Now you just need a UHF STB for the other TV or get a new TV for the other room. If the other room already has a wall socket then most likely there is already a splitter somewhere in the antenna/coax cable system.

that aerial is a gizmo from LINColn RADio [lincrad] in chch and will do uhf in a 1 size fits all manner

Thank you to all for your help. Seems I had all I needed to get primary TV up and running and didn't even know it.

Cheers

Stephen

Reply to Discussion

RSS

NETWORK STATUS ALERTS

See Network Status page for updates.

Freeview On Demand Changes Read More Here

Quick Links

© 2024   Created by Bel @ Freeview.   Powered by

Badges  |  Report an Issue  |  Terms of Service