As of Tuesday 20 September, the latest software update for the Dish TV S8200 and T2200 FreeviewPlus Recorders is available for download. 


This update now includes an ADMIN Setting that allows users to switch between the FreeviewPlus Guide and the Freeview MHEG EPG, when selecting their preferred default guide for when the GUIDE button is pressed on the Remote Control.


Most devices should update automatically if connected to your home network (the internet), in some cases this may not occur and a manual update will be required. 
HAVING ISSUES?
 
Where do I find the DEFAULT GUIDE setting?

Whether you're using the S8200 or the T2200, its location in the Menu will be the same. 

01 - Press the MENU button on your Remote Control to access the Main Menu.

02 - Shift across to the SETTINGS option and scroll up to select ADMIN, press OK

03 - Select DEFAULT GUIDE from the ADMIN options available.

04 - Press the LEFT or RIGHT arrow to choose either FREEVIEWPLUS or MHEG.

05 - Press the GREEN button to save the change. Your chosen default guide will now display when the GUIDE button is pressed.
 
The DEFAULT GUIDE setting does not show under ADMIN?

If for some reason your recorder has not performed the update, the setting will not be available. You will need to perform the software update on your recorder first before going through the steps shown above.

If you require help with updating at any point, contact us. Our Technical Support Team is ready and happy to help!

Views: 272

Reply to This

Latest Activity

Julene Leslie posted a discussion

On Demand Fail

I have a Sony KD-65X7500D tv and on demand hardly ever works.  It plays the first ad but then just…See More
6 hours ago
Tony Bowen replied to Tony Bowen's discussion satellite receiver stopped working
"Problem solved with a new lnb, cable and receiver. Delighted to say I got a signal straight away…"
Monday
Tony Bowen replied to Tony Bowen's discussion satellite receiver stopped working
"Thanks Willis. I tried this and got the same result. Then I checked the LNB to find the plastic…"
May 17
willis replied to Tony Bowen's discussion satellite receiver stopped working
"See if it will switch on with the satellite cable unplugged If so then cable/ lnb suspect If not…"
May 17

Connect With Us!

© 2018   Created by Bel @ Freeview.   Powered by

Badges  |  Report an Issue  |  Terms of Service