How to receive Prime /Bravo Plus 1 The Edge on a Hills HSMX-200 with 10750 LNB

 How to receive Prime / Bravo Plus1/ The Edge  on a Hills HSMX-200 Satellite Receiver with 10750MHZ LNB

You will need to use your Hills Remote.

Tested numerous times on 3 different Satellite Dish's with a 10750MHZ LNB and Hills HSMX-200 Satellite Receiver with latest firmware v1.23

* New * Video reference guide at bottom of page

RESET FACTORY DEFAULT

1. Press Menu on your Hills remote

2. Use the Right arrow on your remote to select System

3. Use Down arrow key to select Set Default

4. Press Enter key

5. Enter 0000  Using number keys

6. Use Down arrow key to select Yes

7. Press Enter key

8. Select *Auckland* as(City Name) Using Right/Left arrow key

9. Use Down arrow key to select Start scanning

10. Press Enter key

If you want the *New* Prime /  Bravo Plus 1 / The Edge

This works with only 10750Mhz LNB's on your Satellite Dish

1. Press Menu

2. Use Right arrow key to select Setup

3. Use Down arrow key to select Antenna Setup

4. Press Enter key

5. Enter 0000  Using number keys

6. Select Satellite editor

7. Press Enter key

8. Use Right arrow key to select Asia Sat4

9. Press the Red key to  Remove satellite

10. Press Enter key

11. Press the Green key to  Add new satellite

12. Press Menu

13. Use Down arrow key to select Tuner Configuration

14. Press Enter key

15. Use Right arrow key to select New sat

16. Use Down arrow key to select LNB local freq

17. Enter 10750 Using number keys / Press Enter key

18. Press Menu

19. Use Down arrow key to select Transponder list editor

20. Press Enter key

21. Use Right arrow key to select New sat

22. Press the Green key to  Add new TP

23. Use Down arrow key to select Frequency enter 12519

24. Use Down arrow key to select Symbol rate enter 22500

25. Press Enter key  then Press Menu

26. Use Down arrow key to select Scan / Press Enter Key

27. Use Right arrow key to select New sat

28. Use Down arrow key to select Start scanning

29. Press Enter key

The Hills HSMX-200 will start scanning and find the new channels.

Once completed successfully, you should have uninterrupted viewing on all channels.

I'm sure hills will be sending me a cheque sometime soon :)

Views: 1766

Reply to This

Replies to This Discussion

Brilliant mate , it works !!. All channels are now tuned. I have posted a full thank you message on your profile page .

Exceptional efforts on your part sir, thank you so much for your time and expertise mate, truly fantastic.

Well done fwd it to Hills and see if they bother to remove their phone message

Excellent work Paul.

I have confirmed that both these options also work with my 11300 LNB, with the appropriate change to step 17, substituting 11300 instead of 10750 and same for Option 2, Step 10 (if 11300 isn't displayed already as was the case with my receiver)



Graham Wilson said:

Excellent work Paul.

I have confirmed that both these options also work with my 11300 LNB, with the appropriate change to step 17, substituting 11300 instead of 10750 and same for Option 2, Step 10 (if 11300 isn't displayed already as was the case with my receiver)

Thanks  Paul and all the others for all your help. I don't have a hills box but I was able to talk my sister in law through it using your instructions.  I live in Christchurch and she lives in Wanganui.

Brilliant thanks Paul

This works for my 10750 Hills HSMX-200 here in Whanganui.

Plus need to push enter after step 26.

Very well done indeed.

Great work, good on you for publishing the info. Thank you.

Reply to Discussion

RSS

Connect With Us!

Latest Activity

Marcel replied to Dunc Burland's discussion Freeview IPTV Service?
"TVNZ 1 and 2 went live with HLS this week, available from https://www.tvnz.co.nz/livetv"
11 hours ago
Biggles replied to Alexander Ballingall's discussion Reception Questions
"Well done. Now if you can get the UHF tuner working you'll have HD as well."
yesterday
Alexander Ballingall replied to Alexander Ballingall's discussion Reception Questions
"On Optus D1 satellite I set the LND freq to 10750 and that did the trick. I now have…"
yesterday
Natalie Turner replied to Natalie Turner's discussion Channels 10 Prime and 12 Choice breaking up after a few minutes
"Thanks Biggles  Will have the antenna and cabling checked out."
yesterday
Biggles replied to Alexander Ballingall's discussion Reception Questions
"OK. You have the wrong satellite and probably wrong LNB freq. Check my settings. Yours should be…"
yesterday
Alexander Ballingall replied to Alexander Ballingall's discussion Reception Questions
"Here's the satellite settings:"
yesterday
Biggles replied to Alexander Ballingall's discussion Reception Questions
"OK. Dump the VHF antenna and bypass the diplexer box. You probably need to get up on the roof and…"
Tuesday
Alexander Ballingall replied to Alexander Ballingall's discussion Reception Questions
Tuesday

Upcoming Works

© 2017   Created by Bel.   Powered by

Badges  |  Report an Issue  |  Terms of Service