Replies to This Discussion

Permalink Reply by Taylor on August 10, 2019 at 11:04

Taylor said:

Taylor said:

Permalink Reply by Taylor on August 10, 2019 at 11:04

Taylor said:

Taylor said:

Taylor said:

Permalink Reply by Taylor on August 10, 2019 at 11:05

tried 22- 12483 that didn't work, tried 12483000 but all the numbers wouldn't fit.

Permalink Reply by Taylor on August 10, 2019 at 11:07

if I plug in the zinwell no issues

Permalink Reply by forumuser on August 10, 2019 at 11:07

Your UHF aerial may need to looked into to see if there is an issue with your signal. 

Permalink Reply by Taylor on August 10, 2019 at 11:11

ok. May have to use the zinwell. Working on that one. Not sure why hills wont work. Have another zinwell in another room as well. No issues.

Permalink Reply by Taylor on August 10, 2019 at 11:32

so this is a zinwell with tv on in master bedroom

Attachments:

• Picture1.png, 648 KB
• Picture2.jpg, 27 KB

Permalink Reply by Taylor on August 10, 2019 at 11:33

I have unplugged the hills freeview rca just on the machine itself and put it on the second zinwell I own which was orignally used for this tv and it works.

Taylor said:

so this is a zinwell with tv on in master bedroom

Permalink Reply by Taylor on August 10, 2019 at 11:34

Not sure why the hill one isn't going
Taylor said:

I have unplugged the hills freeview rca just on the machine itself and put it on the second zinwell I own which was orignally used for this tv and it works.

Taylor said:

so this is a zinwell with tv on in master bedroom

Permalink Reply by Taylor on August 10, 2019 at 11:58

oops I mean the lounge

Taylor said:

Not sure why the hill one isn't going
Taylor said:

I have unplugged the hills freeview rca just on the machine itself and put it on the second zinwell I own which was orignally used for this tv and it works.

Taylor said:

so this is a zinwell with tv on in master bedroom

Permalink Reply by Taylor on August 11, 2019 at 7:57

Gwad..... might help if I plug in the coaxial Cable.... /facepalm

Permalink Reply by forumuser on August 11, 2019 at 10:23

Good to hear it's sorted. :-)

Josh

• ‹ Previous
• 1
• 2
• Next ›
• Page