I set programme to record Prime antiiquies roadshow but when I wanted to watch tvone at the same time ionly got parliament how come?

I thought I could record 2 programmes and watch 1

Views: 769

Reply to This

Replies to This Discussion

what sort of recorder?

1 or 2 tuners?

aerial or satellite?

I have a sat box ultra model s7090 pvr with satellite connection

willis said:

what sort of recorder?

1 or 2 tuners?

aerial or satellite?

Yes, it does have 2 tuners and you can watch a 3rd channel while recording two others but not unless the 3rd channel is on the same mux as those being recorded.

This from the brochure

"Record two channels while watching a third or a prerecorded program (some channel combinations not available)"

NB the wording in the brackets!

i.e. you can probably record Prime and TV3 but not be able to watch TV1. You could only watch channels on the same mux as TV3 or Prime. Read the manual for more info. You would need to research which channels are on each mux on the satellite to find out what combinations will work.

Hi William, Biggles is right,
Because of the new way Prime is broadcast on Freeview Satellite, the tuners on the Myfreeview units may behave differently when recording programmes because of the different frequencies the tuners can handle.

I hope this helps
Kind Regards

Joshua
Thanks everyone

Joshua Hill said:
Hi William, Biggles is right,
Because of the new way Prime is broadcast on Freeview Satellite, the tuners on the Myfreeview units may behave differently when recording programmes because of the different frequencies the tuners can handle.

I hope this helps
Kind Regards

Joshua
Thanks everyone
Bill
Hi I have just realise that Prime is on its own frequency so I should have been able to watch TVone at the same time I was recording Prime
But why did I get Parliamrnt instead of one ?

Hi William 

Can you explain in more detail the appearance of Parliament TV? 

Can you access any other channels other than Parliament when this record happens?

Kind Regards
Joshua 

Hi Joshua
When I pressed one for TVone I got parliament channel
I could get all other channels even tv plus one
Regards Bill

Hi Bill (William)

OK, this is unusual. I might get you to follow these instructions which might determine why TV One has skipped to Parliament TV, 

1. Press Menu on your remote
2. Select User Settings on the menu
3. Select Organiser


Now, on the list of channels which appear to the right, can you see if can spot any icons or symbols next to TV One under the Skip header? 

If there is an icon on TV One, this might mean that the Unit has been told to skip the channel, you can remove this by pressing the Green button on the remote until the icon has gone. 

IF THERE IS NOTHING:

I suggest you contact Dish TV about this and see if their team can solve this unusual issue for you. I have provided their contact details below for your reference if you need them. 

25 McKee Street
Pukete
Hamilton 3200
New Zealand


0800 DISH TV (0800 347 488) or 07 929 4123

Office hours are 9:00am - 5pm NZST, Mon - Fri.

You can also reach them here:
http://www.dishtv.co.nz/contact-us/Hamilton-Office/

Kind Regards
Joshua 

Of course it could be just a faulty remote.



Biggles said:

Of course it could be just a faulty remote.

Reply to Discussion

RSS

NETWORK STATUS ALERTS

See Network Status page for updates.

Freeview On Demand Changes Read More Here

Quick Links

© 2024   Created by Bel @ Freeview.   Powered by

Badges  |  Report an Issue  |  Terms of Service