New LG hybrid tv no satellite signal, help!

Hi all, hope someone out there can help me we have just upgraded our TV and its a new LG Hybrid TV - UHF/or Satellite Freeview, big selling point for us, we wont need to use our freeview box.

once we got it home to set it up, is not picking up any satellite signal. Can anyone help, do i need to change anything? We have now set the freeview box back up and works fine, however it would be nice to have just the one remote.

Thanks, Chris

Did this help? Click to mark!

0 members promoted this

Replies are closed for this discussion.

Replies to This Discussion

Permalink Reply by Biggles on July 6, 2014 at 8:37

You probably have to change the LNB frequency in the setup menu. If you are using an older Sky dish with an old LNB it will probably be on a different frequency to the default TV setup. Check the paramaters in your STB then setup the TVs parameters to match.

"There are predominantly two different LNB Local Oscillator (L.O.) frequencies in use. The two used by Sky are 11300MHz for all older single LNBs (the whitish side of the LNB that faces the dish is round), and 10750MHz for the newer dual throat LNBs (oval shaped face)."

Permalink Reply by willis on July 6, 2014 at 23:48