hills hsmt200a

I am in west Auckland. Don't know how to set up freeview. Asking for channel number and frequency

Views: 94

Replies are closed for this discussion.

Replies to This Discussion

Permalink Reply by Taylor on August 10, 2019 at 11:04



Taylor said:



Taylor said:

Permalink Reply by Taylor on August 10, 2019 at 11:04



Taylor said:



Taylor said:



Taylor said:

Permalink Reply by Taylor on August 10, 2019 at 11:05

tried 22- 12483 that didn't work, tried 12483000 but all the numbers wouldn't fit.

Permalink Reply by Taylor on August 10, 2019 at 11:07

if I plug in the zinwell no issues

Permalink Reply by Josh ✔️ on August 10, 2019 at 11:07

Your UHF aerial may need to looked into to see if there is an issue with your signal. 

Permalink Reply by Taylor on August 10, 2019 at 11:11

ok. May have to use the zinwell. Working on that one. Not sure why hills wont work. Have another zinwell in another room as well. No issues.

Permalink Reply by Taylor on August 10, 2019 at 11:32

so this is a zinwell with tv on in master bedroom

Attachments:
Permalink Reply by Taylor on August 10, 2019 at 11:33

I have unplugged the hills freeview rca just on the machine itself and put it on the second zinwell I own which was orignally used for this tv and it works.

Taylor said:

so this is a zinwell with tv on in master bedroom

Permalink Reply by Taylor on August 10, 2019 at 11:34


Not sure why the hill one isn't going
Taylor said:

I have unplugged the hills freeview rca just on the machine itself and put it on the second zinwell I own which was orignally used for this tv and it works.

Taylor said:

so this is a zinwell with tv on in master bedroom

Permalink Reply by Taylor on August 10, 2019 at 11:58

oops I mean the lounge

Taylor said:


Not sure why the hill one isn't going
Taylor said:

I have unplugged the hills freeview rca just on the machine itself and put it on the second zinwell I own which was orignally used for this tv and it works.

Taylor said:

so this is a zinwell with tv on in master bedroom

Permalink Reply by Taylor on August 11, 2019 at 7:57

Gwad..... might help if I plug in the coaxial Cable.... /facepalm

Permalink Reply by Josh ✔️ on August 11, 2019 at 10:23

Good to hear it's sorted. :-)

Josh

RSS

LATEST:

We'll keep you updated here...

Latest Activity

willis replied to 鸣 Huang's discussion No/bad TV signals since bad weather for 3 weeks
yesterday
鸣 Huang posted a discussion

No/bad TV signals since bad weather for 3 weeks

yesterday
1 Comment
Peter replied to Peter's discussion No NZ channels
Friday
Christopher Mainland replied to Lester James's discussion on demand not working
Friday

Connect With Us!

Be a part of the New Zealand Freeview Community!

Welcome to your Freeview Forum!  This is the online home for all Freeview viewers, retailers, manufacturers and installers. It's a place where you can find help, share advice, tips and your know-how to help another fellow "Freeviewer" out.

How do I get started?

1. Begin by signing up for Freeview Forum here.  Sign up is simple, fast & free, all we ask is that you abide by a few simple guidelines.

2. Once you've signed up, you'll be able to:

What details should be included when asking for help?

Including key details will help the community help you.....

1. What your coverage is (check by entering your full address here).

2. What antenna you're using (indoor of outdoor UHF aerial, or satellite dish).

3. What brand & model your device is.

4. What channels or programmes you're having trouble with (if any).

5. And of course - as many other details as you think would be relevant.

© 2019   Created by Bel @ Freeview.   Powered by

Badges  |  Report an Issue  |  Terms of Service