The "Guide" button on my remote will not work. Is it a problem with the Rermote.

Thanks,

G

Views: 63

Reply to This

Replies to This Discussion

The remote transmits infra-red which is easily detected by your phone's camera. Turn on the camera in your phone and point the remote at the camera. Press the 'Guide' button. You will see it flashing in your phones camera. If it doesn't flash but other buttons do then the remote is faulty.

Reply to Discussion

RSS

Latest Activity

Jon Walker posted a discussion

Sony KD55X8500E TV3 on demand part of freeview not updating.

We have Sony KD55X8500E with current Sony firmware and software all up to date. . About 6 days ago…See More
18 minutes ago
Glen N Monnie Stevens replied to Glen N Monnie Stevens's discussion No signal
"thanks for the help guys It turns out the LNB is the problem. but we managed to get it working for…"
Thursday
Biggles replied to Glen N Monnie Stevens's discussion No signal
"LNB Frequency drift due to heating during the day is the usual cause. Replace your LNB."
Wednesday
John Baird replied to Glen N Monnie Stevens's discussion No signal
"You probably have an ex sky dish, and you need to replace the LNB. The piece at the end, LO 10750"
Wednesday

Connect With Us!

© 2018   Created by Bel @ Freeview.   Powered by

Badges  |  Report an Issue  |  Terms of Service