Can't seem to get Prime with UHF
Hi all.
I bought a Veon TV from the Warehouse with built in freeview. I have a "one for all" indoor UHF Aerial (product code SV9153).
I auto tuned the channels and have 1,2 and 3 and Bravo (and their plus 1 hours) plus the edge, and Al Jazeera, APNA etc.
Don't seem to have Prime. Can anyone advise what settings I should use to manually tune it using my UHF aerial. Sorry I am not very tech savvy and this is my first time at having to set things up myself.
Replies are closed for this discussion.
Replies to This Discussion
-
Permalink Reply by Satellite Networks Motueka on
-
Manual instructions depend on what area you are in. Personally i would never recommend an indoor aerial. What you could try is moving the aerial closer to a window or a wall facing the transmitter and then auto tune again.
-
-
Permalink Reply by Biggles on
-
OK. So you seem to be missing the K1 MUX.
http://freeviewforum.co.nz/tip/mux
Check what your signal strength is on what you are receiving. I suspect it's not good. Indoor antennae are really unreliable unless very near a Tx Site. Sounds to me like you definitely need an external UHF antenna.
You could also check here and tune manually for the missing MUX/Channel
http://www.rsm.govt.nz/online-services-resources/pdf-and-documents-...
-
NETWORK STATUS ALERTS
See Network Status page for updates.
Freeview On Demand Changes Read More Here
Latest Activity
Quick Links
© 2024 Created by Bel @ Freeview.
Powered by
