Replies to This Discussion

Permalink Reply by Paul on June 19, 2016 at 21:36

Hi Robert

Try tuning in using the guides here

http://freeviewforum.co.nz/forum/topics/how-to-get-prime-tv-on-unap...

Permalink Reply by Robert Drey on June 20, 2016 at 9:31

Hi Paul

Thanks for your reply.  I've tried to follow the freeview instructions, however I don't get any signal.  My receiver is currently set on the Optus D2 satellite, which may be the problem.  I've tried to set it for the Optus D1 160E satellite, however still no signal on the 12519 frequency.  Does this mean that I need to re-orientate my satellite dish in order to receive the signal from the D1 satellite?  I originally changed over to the D2 because I got a better signal.

Cheers

Bob
Paul said:

Hi Robert

Try tuning in using the guides here

http://freeviewforum.co.nz/forum/topics/how-to-get-prime-tv-on-unap...

Permalink Reply by nzdtv.com on June 20, 2016 at 14:30

I doubt your dish is looking at optus D2, I expect you simply changed the satellite name. You probably couldnt get signal on D1 as the default LNBF l.o was incorect.

Permalink Reply by Robert Drey on June 21, 2016 at 9:41

How do I change the LNBF 1.0 so that it will receive the signal?

nzdtv.com said:

I doubt your dish is looking at optus D2, I expect you simply changed the satellite name. You probably couldnt get signal on D1 as the default LNBF l.o was incorect.