DishTV and Prime

Prime has reprogrammed itself ok, but we still have the line and words running across the screen on this channel, any easy fix?

Did this help? Click to mark!

0 members promoted this

Replies are closed for this discussion.

Replies to This Discussion

Permalink Reply by Paul on January 6, 2014 at 15:06

What model of Dish TV ?

Permalink Reply by KATE on January 6, 2014 at 22:18

7010 from memory(at holiday house)

Permalink Reply by nzdtv.com on January 6, 2014 at 22:40

Delete it

as that is the old transmission

Permalink Reply by KATE on January 7, 2014 at 20:16

if I delete this, how do I get the new Prime Channel

Permalink Reply by Paul on January 7, 2014 at 20:58

Follow the directions here for the S7010

Follow the directions here for the S7010PVR (see below)

KATE said:

if I delete this, how do I get the new Prime Channel

Permalink Reply by Bernard on January 9, 2014 at 20:55

I also have the same issue. The original signal is as strong as it was before but the new frequency is really weak. I have two satelittes dishes with different decoders. No issue with the old Kaon....... not planning to change decoders at this stage. Is the problem with the tuning unit of the 7010? I've changed the dish tv unit as per instructions so it should work ok.

Permalink Reply by Paul on January 9, 2014 at 21:03

What do you mean by really weak ?

Permalink Reply by forumuser on January 9, 2014 at 22:08

Must be a LNB issue?

Paul said:

What do you mean by really weak ?

Permalink Reply by Bernard on January 9, 2014 at 22:52

Tnx for reply/comment. No issues with other stations on same LNB. The other stations on D1 are ok, also the old Prime channel looks good. Signal on new transponder is weak or non existent. No issue at this stage as I can watch prime on my other unit (Kaon).

Joshua Hill said: