Replies to This Discussion

Permalink Reply by nzdtv.com on June 17, 2014 at 5:05

You are trying to install a very old webzeal

You would do better to go to http://www.ultrapower.co.nz and contact them requesting the latest version.

 

 

• ▶ Reply

Permalink Reply by Arthur Wright on June 17, 2014 at 12:01

Thank you for the link, I've downloaded the new Webzeal file and will upload it when I get a chance.                                                                                                                                                                     In the mean time I have two more oddball things happening, the first I was experiencing before  I updated to the Latest firm ware and that is if I'm recording  TV1 and Tv3 I find that I can not access Prime, to view or record at the same time ( I was wondering if having separate feeds to each individual tuners,  rather than a" loop through" set up would solve the problem?)      The other is that when stopping a recording that one is viewing the play list appears with out  pushing the Play list button, it has done that since the upgrades, a bit strange.                                                                                                                                                                            Thanks for any comments or suggestions, so far what you have suggest has been really  great, and I thank you for the help

    Arthur

• ▶ Reply

Permalink Reply by Biggles on June 17, 2014 at 12:35

If you only have two tuners you can't watch or record another channel if its on a different mux as Prime is. It will tell you so in the manual. To watch or record a 3rd mux requires 3 tuners.

Arthur Wright said:

Thank you for the link, I've downloaded the new Webzeal file and will upload it when I get a chance.                                                                                                                                                                     In the mean time I have two more oddball things happening, the first I was experiencing before  I updated to the Latest firm ware and that is if I'm recording  TV1 and Tv3 I find that I can not access Prime, to view or record at the same time ( I was wondering if having separate feeds to each individual tuners,  rather than a" loop through" set up would solve the problem?)      The other is that when stopping a recording that one is viewing the play list appears with out  pushing the Play list button, it has done that since the upgrades, a bit strange.                                                                                                                                                                            Thanks for any comments or suggestions, so far what you have suggest has been really  great, and I thank you for the help

    Arthur

• ▶ Reply

Permalink Reply by nzdtv.com on June 17, 2014 at 12:35

Which version of webzeal did you load? I think 2.71 is the newest ? not sure as I don't use it.

The receiver only has 2 tuners TV1 , TV3 and Prime now = 3 transponders active, you need make use of the +1 channels to get around it.

The part about stopping a watched program. That's normal it will return to the programs list. You can of course resume the program playing at any stage that you wish to return to it,, it will remember it.

 

 

• ▶ Reply

Permalink Reply by Arthur Wright on June 17, 2014 at 14:40

Thanks for the reply. So much the  for the manual stating (page 32) "STB can record up to three no mention different service simultaneously"  which I can do (providing that one of those channels are not Prime)  I can record 3 channels like TV1 TV2, Maori and watch tv4 all at once on the two tuners  but not if  one of them is Prime, so why is Prime different? I can record TV1 and TV3 individually and watch prime but not all together

 As for the play list popping up after ceasing watching a recording one might be viewing, It seems to only have started to do so after the upgrade and never used to do it before, weird 

Finally The WebZeal version was 2.51s I have contacted Ultrapower enquiring as to whether or not they have the latest version,

I’m still waiting for their reply, if they have,  I’ll wait the upgrading with ver 2.51s  and download the later version.

  Arthur 

• ▶ Reply

Permalink Reply by willis on June 18, 2014 at 1:55

prime is on its own frequency

tv 1,2,maori & 1,2 +1 on another

c4 on its own

tv 3,4,3+1,cue,choice,parliament,te reo,sommet sports etc on another 

• ▶ Reply

Permalink Reply by nzdtv.com on June 18, 2014 at 3:58

RE :  As for the play list popping up after ceasing watching a recording one might be viewing, It seems to only have started to do so after the upgrade and never used to do it before, weird 

Not weird, its more logical for it to return to the playlist. So you can delete what you just finished viewing.

• ▶ Reply

▶ Reply to Discussion