Greetings I have Digiview 110 satellite receiver bought on Trade Me some years ago and need to tune it in to the new Prime TV location.  It is currently set on the Optus D2 Satellite and it won't let me change the TP frequency to accommodate the Prime channel (I can still receive channel 4+).  How do I set up this receiver to access Prime??  Cheers  Bob

Views: 863

Replies are closed for this discussion.

Replies to This Discussion

Hi Robert

Try tuning in using the guides here

http://freeviewforum.co.nz/forum/topics/how-to-get-prime-tv-on-unap...

Hi Paul

Thanks for your reply.  I've tried to follow the freeview instructions, however I don't get any signal.  My receiver is currently set on the Optus D2 satellite, which may be the problem.  I've tried to set it for the Optus D1 160E satellite, however still no signal on the 12519 frequency.  Does this mean that I need to re-orientate my satellite dish in order to receive the signal from the D1 satellite?  I originally changed over to the D2 because I got a better signal.

Cheers

Bob
Paul said:

Hi Robert

Try tuning in using the guides here

http://freeviewforum.co.nz/forum/topics/how-to-get-prime-tv-on-unap...

I doubt your dish is looking at optus D2, I expect you simply changed the satellite name. You probably couldnt get signal on D1 as the default LNBF l.o was incorect.

How do I change the LNBF 1.0 so that it will receive the signal?

nzdtv.com said:

I doubt your dish is looking at optus D2, I expect you simply changed the satellite name. You probably couldnt get signal on D1 as the default LNBF l.o was incorect.

RSS

NETWORK STATUS ALERTS

See Network Status page for updates.

Freeview On Demand Changes Read More Here

Quick Links

© 2024   Created by Bel @ Freeview.   Powered by

Badges  |  Report an Issue  |  Terms of Service