Tune in Prime Bravo Plus 1 & The Edge TV & TV3 on DishTV S7010PVR

 

DishTV S7010PVR

To add the new transmissions.

Step 1

Press the Menu button to bring up the main menu
Press the left arrow until the Installation menu is displayed then press OK
Select TP Manager and press OK   *If 12519 is already present select and go to step 2*
Press the down arrow to select one of the Transponder entries
Press the Red key (To add)
Using the number keys enter 12519
Press the down arrow to select the Symbol rate and enter 22500
Press OK to save the transponder details

Step 2


Press the Blue key (To scan)
Press the right arrow to select Free Only and press OK

The receiver will then scan through and locate the new transmissions.

This process will take less than 1 minutes to complete.

Once the scan process is completed the receiver will return to the Transponder list.

Press the Exit button to return to normal viewing.

*NEW*

Manually Add TV3  works with both Revision 1 & Revision 2 of the S7010PVR.

Press the Menu Button to bring up the main Menu
Press the Left Arrow until the Installation Menu is displayed then press OK
Select TP Manager and press OK
Press the Down Arrow and select 12456
Press the Blue Button (To Scan)
Press the Right Arrow to select Free Only and press OK

You will need to organise your channels into the correct order after scanning.

Views: 3930

Reply to This

Replies to This Discussion

Added instructions for TV3

Reply to Discussion

RSS

NETWORK STATUS ALERTS

See Network Status page for updates.

Freeview On Demand Changes Read More Here

Quick Links

© 2024   Created by Bel @ Freeview.   Powered by

Badges  |  Report an Issue  |  Terms of Service