Replies to This Discussion

Permalink Reply by Biggles on November 4, 2013 at 8:54

The affected TV's tuner is probably not quite as sensitive as the other one and the signal may be marginal. Antenna should be UHF only with rg6 cable and good quality splitter all with f connectors. Check all cables and connections. You may need a masthead amp, different antenna, or  separate antenna for each TV.

Permalink Reply by Steve J on November 6, 2013 at 13:34

I have friends in Bell Block with similar issues on UHF analogue   before the DVBT arrived . Huge belt of pine trees  . Eventually found a spot much lower than original antenna location  which got more signals from underneath the shelter belt where it had been thinned and pruned . Trees are now gone so issue went away .

You could possibly try one of those Kingray Low Noise  UHF amps for DTV  may just be enough to help  ( MDA20U )