When prime moved last time I managed to change both our set boxes however this time round out two set boxes are not mentioned yet were both approved sets at that time. wee have

Dish  TV  S7071PRV and

TOPFIELD TF 6000 Fe

 Any one else got this problem and be of help to me please?

 

Views: 1253

Replies are closed for this discussion.

Replies to This Discussion

Hi Anne 

Please see the instructions for the following: 

Dish TV S7070pvr

  1. Press the Menu Button to bring up the main Menu
  2. Press the Left Arrow until the Installation Menu is displayed then press OK
  3. Select TP Manager and press OK
  4. Press the Down Arrow once and you will see a Yellow banner appear
  5. Press the Red Button (To Add)
  6. Using the Number Pad enter 12519
  7. Press the Down Arrow to select the Symbol Rate and enter 22500
  8. Press OK to save the Transponder details
  9. Press the Blue Button (To Scan)
  10. Press the Right Arrow to select Free Only and press OK

The receiver will then scan through and locate the Prime transmission. This process will take less than 1 minutes to complete. Once the scan process is completed the receiver will return to the Transponder list.

Press the Exit Button to return to normal viewing. If you want to get all the channels loaded in their correct positions you can download an updated Channel List from the S7010PVR Product Page.

Topfield: 


This is an unapproved model, however the public has updated the instructions which can be found here

For a better experience, go for an APPROVED PRODUCT. 
see here for more information and browse approved products here.

I hope this information helps, Please let me know if you need further assistance

Regards,

Josh Hill 

Discussion Closed

RSS

NETWORK STATUS ALERTS

FIXED: EPG Issue-Timaru: Missing EPG info and in turn can not record. (Last updated: 30 NOV).

ALL OTHER PLATFORMS WORKING WELL.

Connect With Us!

Be a part of the New Zealand Freeview Community!

Welcome to your Freeview Forum!  This is the online home for all Freeview viewers, retailers, manufacturers and installers. It's a place where you can find help, share advice, tips and your know-how to help another fellow "Freeviewer" out.

How do I get started?

1. Begin by signing up for Freeview Forum here.  Sign up is simple, fast & free, all we ask is that you abide by a few simple guidelines.

What details should be included when asking for help?

Including key details will help the community help you.....

1. What your coverage is (check by entering your full address here).

2. What antenna you're using (indoor of outdoor UHF aerial, or satellite dish).

3. What brand & model your device is.

4. What channels or programmes you're having trouble with (if any).

5. And of course - as many other details as you think would be relevant.

© 2020   Created by Bel @ Freeview.   Powered by

Badges  |  Report an Issue  |  Terms of Service