Replies to This Discussion

Permalink Reply by forumuser on May 30, 2016 at 10:44

Hi Anne 

Please see the instructions for the following: 

Dish TV S7070pvr

1. Press the Menu Button to bring up the main Menu
2. Press the Left Arrow until the Installation Menu is displayed then press OK
3. Select TP Manager and press OK
4. Press the Down Arrow once and you will see a Yellow banner appear
5. Press the Red Button (To Add)
6. Using the Number Pad enter 12519
7. Press the Down Arrow to select the Symbol Rate and enter 22500
8. Press OK to save the Transponder details
9. Press the Blue Button (To Scan)
10. Press the Right Arrow to select Free Only and press OK
    
    

The receiver will then scan through and locate the Prime transmission. This process will take less than 1 minutes to complete. Once the scan process is completed the receiver will return to the Transponder list.

Press the Exit Button to return to normal viewing. If you want to get all the channels loaded in their correct positions you can download an updated Channel List from the S7010PVR Product Page.

Topfield: 

This is an unapproved model, however the public has updated the instructions which can be found here

For a better experience, go for an APPROVED PRODUCT. see here for more information and browse approved products here.

I hope this information helps, Please let me know if you need further assistance

Regards,

Josh Hill 

Permalink Reply by forumuser on April 2, 2020 at 9:36

Discussion Closed