re decoder

hi ive a strong 6006 freeview decocder

for some reason im not sure how this happen some tv channels are radio channels is threre a way to fix this issues or is it the decoder as ive done re tune with the same problem would any one know what the issue is thanks

Did this help? Click to mark!

0 members promoted this

▶ Reply to This

Replies to This Discussion

Permalink Reply by Biggles on January 24, 2015 at 15:02

No issues. That's normal. There are both Radio and TV channels on Satellite and Terrestrial Freeview.

http://www.freeviewnz.tv/tv-guide/freeview-channels.aspx

Nothing wrong with your decoder.

▶ Reply

Permalink Reply by david on January 24, 2015 at 15:07

the issues is they are meant to tv channels and im getting them as radio channels like tv 1 is a radio station

▶ Reply

Permalink Reply by Biggles on January 24, 2015 at 16:15

Check your remote which has a TV/Radio button and you've probably accidentally switched into Radio mode.

See pg16 of your manual

To change between TV and Radio channel lists use TV/R button from normal operation mode or
from channel list mode.

▶ Reply

Permalink Reply by forumuser on January 24, 2015 at 20:19

Hi David

Biggles is spot on, the cause will be you accidently toggling the TV/Radio button on your remote, see if pressing that button again helps you get back to Freeview TV.

Let us know if your still having issues :-)

Joshua

▶ Reply

Permalink Reply by david on January 24, 2015 at 20:26

That's I thought tv1 still a radio channel I've check the tv/radio section and I've missing all the tvnz channels as they are in the radio section and I'm missing them in the tv section I've try a rescan with no luck I've being thinking the decoder might be at the ends of its days