noty getting all channels
i live in christchurch and im using veon tv with built in hd freeview with uhf arieal at roof am using amplifier for good quality. i am just getting 10-13 channels im missing chaneel 3,edge tv,apna tv and so. i am just wondering is there anyone who can help me. i am poor to pay technican.
Replies to This Discussion
-
Permalink Reply by Biggles on
-
What sort of amplifier are you using? In Christchurch you shouldn't need one unless in a really bad signal area.
-
Permalink Reply by sabrina on
-
It is one for all from warehouse,,, it was too bad before can't even watch anything,,,freeview is Crystal clear now. But still missing channels,
-
-
I'm living in woolston chch,, I tried indoor antenna from duck Smith, it didn't worked at all,
-
-
missing uhf ch 28 and 32 = poor bottom end aerial gain
could try lifting or lowering the aerial 1/2 m
-
-
Check your antenna, connections and cables. In Woolston you shouldn't need an amplifier as you should be able to see the Transmitter Tower from your house. And anything other than a Masthead amp is next to useless anyway. A weak signal needs to be amplified at the antenna, not the TV end of the coax. At the TV end it amplifies noise as well as signal.
Are you sure your antenna is UHF and mounted horizontal?
-
-
Amplifier is working great signal quality is great but not getting all channels,,yup antenna is uhf and mounted horizontal,
-
Permalink Reply by forumuser on
-
Hi Sabrina,
If you gain UHF 28 and 32 then you shouldn't have any issues loosing the already tuned in channels , try making adjustments and take note of the position each time.
-
-
Have you tried without the amplifier? It's possible you may be getting too much signal and overloading the tuner.
-
-
seems most of woolston is behind a 287m hill
- Attachments:
-
-
woolston-chch.JPG, 79 KB
-
NETWORK STATUS ALERTS
See Network Status page for updates.
Freeview On Demand Changes Read More Here
Latest Activity
Quick Links
© 2024 Created by Bel @ Freeview.
Powered by
