I have just bought an Aeral Box T2200 but can't get a signal. I have a HDMI cable attached to the back but support said I need an aerial cable too. Is that correct and if so is that just between the TV and the aerial box?
I have an aerial not a satellite dish
My Smart Tv works fine
Any help would be appreciated

Views: 273

Reply to This

Replies to This Discussion

Page 9 of the manual shows you how to connect HDMI and a UHF Antenna.

Normally you would connect the UHF antenna to the T2200 and then run an antenna cable from the T2200 cable out socket to the TV's Antenna input socket.

Reply to Discussion



  • OnDemand Issues for SAMSUNG SMART TV
    We are aware of issues with these TVs, It is under investigation.  Please check NETWORK STATUS for the latest updates. 

    If you post regarding this, please include your Model Number which can be found in the Menu or the back of your TV. 

Latest Activity

Connect With Us!

Be a part of the New Zealand Freeview Community!

Welcome to your Freeview Forum!  This is the online home for all Freeview viewers, retailers, manufacturers and installers. It's a place where you can find help, share advice, tips and your know-how to help another fellow "Freeviewer" out.

How do I get started?

1. Begin by signing up for Freeview Forum here.  Sign up is simple, fast & free, all we ask is that you abide by a few simple guidelines.

What details should be included when asking for help?

Including key details will help the community help you.....

1. What your coverage is (check by entering your full address here).

2. What antenna you're using (indoor of outdoor UHF aerial, or satellite dish).

3. What brand & model your device is.

4. What channels or programmes you're having trouble with (if any).

5. And of course - as many other details as you think would be relevant.

© 2020   Created by Bel @ Freeview.   Powered by

Badges  |  Report an Issue  |  Terms of Service