Replies to This Discussion

Permalink Reply by Jon Patrick on January 4, 2018 at 22:51

I live in Carterton and about a month or two ago I also noticed that I no longer get Maori TV and The Te Reo channels.

Every other channel has a perfect signal.

An Auto re-tune, then a factory reset and another re-tune still won't bring them back.

• ▶ Reply

Permalink Reply by Biggles on January 5, 2018 at 7:43

Try a manual tune on Channel 39 and/or 38 depending on your location.

http://www.rsm.govt.nz/online-services-resources/pdf-and-documents-...

You may also find your auto-tune has found them but allocated them a LCN of 800 or higher instead of their normal LCN numbers. I seem to remember that with my Panasonic I had to do a manual tune and rearrange the logical channel numbers. The FW doesn't allow for correct tuning of the new MUX.

.

• ▶ Reply

Permalink Reply by Trevor Adair on January 14, 2018 at 20:01

I also can't get Maori TV & Te Reo channels, after a full re-tune.

I have emailed a contact at jda, who are responsible for the Wairarapa transmission, pointing them to this thread.

I will report back if there is anything to report.

• ▶ Reply

Permalink Reply by Warren Harding on January 15, 2018 at 10:56

We are looking into this.

 Warren Harding

JDA

• ▶ Reply

▶ Reply to Discussion