Homecast HT9200DTR Recording issue

Does anyone who has the above box have a problem watching TV when recording 2 channels at once? We never had this problem until we moved house, now in Silverdale, Rodney. When we record 2 channels, 1 & 2 are blank and we cannot watch either of them. It is a new aerial in the loft. We are also getting pixelation on all 3 televisions. If anyone has any ideas on what is causing this, I would appreciate your input. Thanks.

Did this help? Click to mark!

0 members promoted this

Replies are closed for this discussion.

Replies to This Discussion

Permalink Reply by Biggles on May 25, 2014 at 8:51

Moving the antenna just a short distance can make a big difference. You need to locate the "sweet spot" on your roof. Had same problem at my son's place. Moving the antenna about over a few metres made the difference between no signal and good signal. Just had to find the right spot.

nzdtv.com said:

2000 is the limit on the Samsungs. Something is disrupting the signal.

If you can't relocate the antenna try raising or lowering it a few inches on the pole. Higher is usually better.