Hi, I have a TV Tuner Card  I would like to know how to set the frequency correct for freeview optus d1

I am in Nelson, NZ area

I have attached image

Thank you

Views: 195


Reply to This

Replies to This Discussion

12456 horizontal,symbol rate 22500
12483 h
12519 h

Which ones do I put in the LOF1, LOF Switch, LOF2

willis said:

12456 horizontal,symbol rate 22500
12483 h
12519 h

LOF1 im guessing is Local Oscillator Frequency which most commonly will be either 11300 or 10750. This should be written on your LNBF.

Leave it on single LNB and leave the switch blank .

Good luck

Reply to Discussion



11th September 2019 -UPDATED-

Firmware updates released for S8100 and S8300 boxes, please follow updates here

Connect With Us!

Be a part of the New Zealand Freeview Community!

Welcome to your Freeview Forum!  This is the online home for all Freeview viewers, retailers, manufacturers and installers. It's a place where you can find help, share advice, tips and your know-how to help another fellow "Freeviewer" out.

How do I get started?

1. Begin by signing up for Freeview Forum here.  Sign up is simple, fast & free, all we ask is that you abide by a few simple guidelines.

2. Once you've signed up, you'll be able to:

What details should be included when asking for help?

Including key details will help the community help you.....

1. What your coverage is (check by entering your full address here).

2. What antenna you're using (indoor of outdoor UHF aerial, or satellite dish).

3. What brand & model your device is.

4. What channels or programmes you're having trouble with (if any).

5. And of course - as many other details as you think would be relevant.

© 2019   Created by Bel @ Freeview.   Powered by

Badges  |  Report an Issue  |  Terms of Service