I have purchased a Dish antenna which is proudly sitting on the roof, aligned approximately to the Optus D1 azimuth and elevation. I have a Pansonic TH-24A400Z TV purchased second hand and which is  waiting for collection. What I need to know from somebody, please, is whether I need a blackl box device to match the dish LNB into this particular TV or not. Nobody seems to be able to tell me. The LNB Output is 950Mhz to 1450 Mhz. Thanks in anticipation....

Views: 367

Reply to This

Replies to This Discussion

It doesn't have a sat tuner so you will need either a Sat Box between the Dish and the TV or UHF antenna direct to TV..

https://www.panasonic.com/nz/support/product-archives/product-archi...

Thanks, that is what I suspected. I feel silly having bought the TV on trademe only to find out that the TVs of this family are pretty well rubbished for picture quality by Consumer in its latest magazine review. When I receive it I will try it out and maybe write it off as a bad decision. Further to your comments, we have only satellite coverage here in the far north, so UHF cannot be used.

Reply to Discussion

RSS

Latest Activity

Richard Warlow posted a discussion

Panasonic DVR Recorders - Loading Problem

I was wondering when the loading problem is going to be fixed on the Panasonic DVR Recorders?There…See More
18 hours ago
Cliff Baker replied to Cait's discussion Freeview on demand no longer working
"Also on the Network status page "
23 hours ago
Cliff Baker replied to Cait's discussion Freeview on demand no longer working
"Same problem with my 2015 Sony Android tv. From geekzone there is a problem with the On Demand app…"
yesterday
Biggles replied to Kane's discussion No TV1 TV2 Duke or Prime
"Try Manual Tune on the appropriate MUX and check signal strength. Most likely an antenna/cabling…"
yesterday

Connect With Us!

© 2018   Created by Bel @ Freeview.   Powered by

Badges  |  Report an Issue  |  Terms of Service