Replies to This Discussion

Permalink Reply by Amanda on November 19, 2018 at 19:04

Forgot to mention I'm hooked up to a sky dish it was working fine before it was reset

• ▶ Reply

Permalink Reply by Biggles on November 20, 2018 at 8:30

If it was working before the reset then most likely the LNB frequency in the setup menu is incorrect. It probably doesn't match your LNB. If 10750 doesn't work try 11300. Before doing a factory reset it's always a good idea to check the setup menu and note down all the parameters so you can check they are the same after the reset.

• ▶ Reply

Permalink Reply by John Baird on November 20, 2018 at 17:51

As Biggles said ,but Dish Tv boxes try both LNB frequencies at set up.

What is more likely is that your LNB has drifted and is more like 10745 than 10750

• ▶ Reply

Permalink Reply by Amanda on November 21, 2018 at 16:34

Thank you very much have just changed settings and it is working again once again thanks

• ▶ Reply

▶ Reply to Discussion