Replies to This Discussion

Permalink Reply by Paul on June 16, 2016 at 14:07

Try this (I don't own this receiver just tried to figure it out from the manual)

1. Menu

2. Installation

3. Transponder List

4. Press the SAT button on remote to select Optus D1

5. Press the Red key (Add) Adds a new transponder

6. Frequency enter 12519

7. Symbol rate enter 22500

8. Polarization  = H

9. Press the Blue button to Scan

Let me know if this works or any steps are missing.

• ▶ Reply

Permalink Reply by Robert Hepple on June 23, 2016 at 22:47

http://www.westronics.co.nz/990%20Channels.bin

http://www.westronics.co.nz/Channel%20Update%20Instructions%20Ultra...

There is a new channel plan and instructions here , just need a USB stick and a PC , will also be updated with TV3 and Bravo channel updates (just over a week away) - cheers Robert

• ▶ Reply

▶ Reply to Discussion