Satellite Networks Motueka's Discussions (185)

View

Discussions Replied To (172)	Replies	Latest Activity
"If your getting loads of foreign channels their coming of optus d2. If your using as…" Satellite Networks Motueka replied Aug 4, 2016 to DishTV S7070 receiver - tuning problems and weird signals	4	Aug 4, 2016 Reply by Biggles
"If you want to connect to a satellite dish you will need a satellite box. A UHF box…" Satellite Networks Motueka replied Aug 2, 2016 to Keen to watch the Olympics on PRIME but don’t have sky…	6	Aug 2, 2016 Reply by Rob
"Best way forward in my opinion is to run one cable per device. The newer Sky lnbfs h…" Satellite Networks Motueka replied Jul 28, 2016 to Problem with Sky and Freeview from same satellite dish	7	Jul 29, 2016 Reply by Dan
"What sort of splitter did you use ???? Is it diode steered???is it power pass both p…" Satellite Networks Motueka replied Jul 28, 2016 to Problem with Sky and Freeview from same satellite dish	7	Jul 29, 2016 Reply by Dan
"Try installing the latest firmware should fix it. http://www.dishtv.co.nz/support/d…" Satellite Networks Motueka replied Jul 28, 2016 to Problem with recording on 7070r	1	Jul 28, 2016 Reply by Satellite Networks Motueka
"Have you tried the latest firmware???" Satellite Networks Motueka replied Jul 19, 2016 to Help please my EPG has gone	9	Jul 19, 2016 Reply by Satellite Networks Motueka
"The ZeaTek 4300HD is not a Freeview approved box. The instructions you followed were…" Satellite Networks Motueka replied Jul 18, 2016 to No Channels	1	Jul 18, 2016 Reply by Satellite Networks Motueka
"Manual instructions depend on what area you are in. Personally i would never recom…" Satellite Networks Motueka replied Jul 13, 2016 to Can't seem to get Prime with UHF	2	Jul 13, 2016 Reply by Biggles
"Thats why i said make sure the LNB settings are correct on the hybrid TV. I take it…" Satellite Networks Motueka replied Jul 12, 2016 to Switching from T-Box to Freeview Sat - no signal	7	Jul 12, 2016 Reply by Luke Millar
"Make sure the LNB settings on the TV are set to 10750. they usually default to 11300" Satellite Networks Motueka replied Jul 12, 2016 to Switching from T-Box to Freeview Sat - no signal	7	Jul 12, 2016 Reply by Luke Millar

‹ Previous
1
…
7
8
9
10
11
…
18
Next ›

RSS

Welcome to
freeview forum

Sign Up
or Sign In

Or sign in with:

NETWORK STATUS ALERTS

See Network Status page for updates.

Freeview On Demand Changes Read More Here

Latest Activity

Top News
·
Everything

Ren replied to Ren's discussion Optus D2 (Freeview Satellite) Failure - Replacement Plan ?

Wednesday

Iggy replied to Ren's discussion Optus D2 (Freeview Satellite) Failure - Replacement Plan ?

Wednesday

belinda handley posted a discussion

signal interference

Nov 12

0 Comments 0 Promotions

David Adamson posted a discussion

sky open+ no audio or video

Sep 22

0 Comments 0 Promotions

Quick Links

Badges | Report an Issue | Terms of Service

#xg { position:relative;top:120px; } #xn_bar { top:120px; }

Hello, you need to enable JavaScript to use freeview forum.

Please check your browser settings or contact your system administrator.

Satellite Networks Motueka's Discussions (185)

"If your getting loads of foreign channels their coming of optus d2. If your using as…"

"If you want to connect to a satellite dish you will need a satellite box. A UHF box…"

"Best way forward in my opinion is to run one cable per device. The newer Sky lnbfs h…"

"What sort of splitter did you use ???? Is it diode steered???is it power pass both p…"

"Try installing the latest firmware should fix it. http://www.dishtv.co.nz/support/d…"

"Have you tried the latest firmware???"

"The ZeaTek 4300HD is not a Freeview approved box. The instructions you followed were…"

"Manual instructions depend on what area you are in. Personally i would never recom…"

"Thats why i said make sure the LNB settings are correct on the hybrid TV. I take it…"

"Make sure the LNB settings on the TV are set to 10750. they usually default to 11300"

NETWORK STATUS ALERTS

Latest Activity

signal interference

sky open+ no audio or video

Quick Links