Replies to This Discussion

Permalink Reply by Alan Cobcroft on September 16, 2013 at 16:30

Your Dish is not pointing at Optus D1 (160E) where the NZ channels are

You will need to get a TV Tech in to have the Dish adjusted

Permalink Reply by Matt on September 16, 2013 at 17:01

Cheers Alan, thanks for the response.

Permalink Reply by nzdtv.com on September 17, 2013 at 11:01

You might be able to save a few dollars.

from behind the dish turn the dish 2 inches to the right and try a rescan

If you locate the Freeview and other D1 signals make a fine tweak to the dish elevation to peak the signal tighten up everything and you should be fine.

 

 

Permalink Reply by Matt on September 19, 2013 at 17:20

Cheers for the money saver, might give it a go.

 

Permalink Reply by Steve J on September 20, 2013 at 9:40

Permalink Reply by Steve J on September 20, 2013 at 9:43

You also need to adjust the Elevation and LNBF Skew angle for best results or you will suffer from the dreaded rain fade .

Best results will require a satellite meter or Spectrum Analyzer for best

X polarity null . Suggest you get an installer to do it for Optimum results !!