Rescan on LG Hybrid TV

You will be using your LG Remote Control, If you don’t have your remote anymore, please contact LG for a replacement, call 0800 542 273 or go to LG Support online, www.lg.com/nz

 

The following is provided by LG.

 

On an LG Netcast TV

 

  1. Press the “Setting/Menu” key on remote
  2. Select “Setup” then “Auto Tuning”

 

On an LG web OS TV

 

  1. Press “Setting” key on remote
  2. Select “Advanced” then ”programme”
  3. Select “Tuning” then ”Auto Tuning”
  4. Select “Start” to commence tuning.

 

Once completed, you should be able to watch all channels without interruptions.

 

To contact the manufacturer, call 0800 542 273 or go to LG Support online, www.lg.com/nz

Connect With Us!

Latest Activity

Satellite Networks Motueka replied to Karyn Jensen 's discussion Dish S7070
"Id be looking at replacing the LNB."
33 minutes ago
Karyn Jensen replied to Karyn Jensen 's discussion Dish S7070
"Definitely S7070 :-)"
15 hours ago
Paul replied to Karyn Jensen 's discussion Dish S7070
"Is it a S7070 or S7070r ?"
16 hours ago
Karyn Jensen replied to Karyn Jensen 's discussion Dish S7070
"Thanks for the info. The signal and strength are both showing 0% when normally it shows at about 78%"
17 hours ago
Biggles replied to Patricia Harkins's discussion Which Freeview recording box?
"HTPC = Home Theatre PC. Usually a low cost small footprint silent box. No fans to make noise while…"
22 hours ago
Biggles replied to Karyn Jensen 's discussion Dish S7070
"Check your signal strength in the Tuning Menu too. My Sat receiver shows around 56% signal and 40 -…"
22 hours ago
Patricia Harkins replied to Patricia Harkins's discussion Which Freeview recording box?
"Thank you so much for the advice, appreciated. I am not familiar with HTPC but shall look into it.…"
22 hours ago
Biggles replied to Patricia Harkins's discussion Which Freeview recording box?
"Never had any problem with my Panasonic recorders. On the other hand the DishTV and others seem to…"
22 hours ago

Upcoming Works

© 2017   Created by Bel.   Powered by

Badges  |  Report an Issue  |  Terms of Service