Replies to This Discussion

Permalink Reply by Satellite Networks Motueka on November 26, 2019 at 15:53

Have you tried doing an update?

Permalink Reply by forumuser on November 26, 2019 at 15:57

Hi Hein 

Please check to see if the device is on the latest update. If you need help with this then please let me know. 

Kind Regards

Josh

Permalink Reply by Hein Frauendorf on November 26, 2019 at 16:04

Hi guys.

I just checked again, its on the latest version (4.199).

Tnx

Hein

Permalink Reply by forumuser on November 26, 2019 at 16:08

Hi Hein 

Could you try switching off the unit at the wall, leave for 20 mins and then switch this back on and see what happens. 

Josh

Hein Frauendorf said:

Hi guys.

I just checked again, its on the latest version (4.199).

Tnx

Hein

Permalink Reply by Hein Frauendorf on November 26, 2019 at 21:06

Hey Josh

Oh no. Sorry that didn't help either.

Cheers

Hein

Josh ✔️ said:

Hi Hein 

Could you try switching off the unit at the wall, leave for 20 mins and then switch this back on and see what happens. 

Josh

Hein Frauendorf said:

Hi guys.

I just checked again, its on the latest version (4.199).

Tnx

Hein

Permalink Reply by Satellite Networks Motueka on November 27, 2019 at 7:57

What about a factory reset or try ringing Panasonic on 092720178

Permalink Reply by Hein Frauendorf on January 17, 2020 at 9:16

Hi All

Thought I'd just close this off.

I rang Panasonic, they couldn't really help and referred me back to Freeview.

However, I discovered this was all of my own making;

On my network I run my own small DNS server to block adds (pihole). The IP for this DNS server is configured in DHCP and thus assigned automatically. This was interfering with the Freeview service, and all I had to do was manually configure the DNS server on the TV to a "non-blocking" DNS (8.8.8.8).

All is working as expected now.

Thanks for everyone's time.