Replies to This Discussion

Permalink Reply by forumuser on December 6, 2013 at 13:58

Hi Gena,

Have you had a look at this post: http://freeviewforum.co.nz/forum/topics/freeview-satellite-adjustin...

It will tell you how to adjust your LNB if it has gone off coarse over time

Permalink Reply by Gena Weston on December 6, 2013 at 14:28

So is it due to my aerial

Attachments:

• IMG_20131206_091941.jpg, 319 KB
• IMG_20131206_092145.jpg, 3.5 MB
• IMG_20131206_092223.jpg, 3.2 MB

Permalink Reply by Gena Weston on December 6, 2013 at 14:35

I don't know what's gone wrong all I know is that it said no signal and some one default setting and I don't know why and no it says no service found I have taken a photo of  what's happened to it

Permalink Reply by forumuser on December 6, 2013 at 14:57

I see you are using an old SKY LNB which has been advised to be replaced, you will need to look at some cheap good versions on Trademe like this one http://www.trademe.co.nz/electronics-photography/tvs/cables-aerials...

you can do this by unscrewing the bracket and then screwing it back into place with the new LNB. and then using the guide I linked you to align it properly.

Hope this helps