Hi, I have had problems with receiving Prime, Duke, and a few other channels. I bought a cheap 90 cm dish that came with the above LNB. I fitted the dish with my existing LNB and received all channels but needed to fine tune the LNB angle it's around the 8pm angle. It seems with adjustment I can get Prime and it's group very well or TV 1,2,3, etc very well but to get both the LNB needs to be at an angle where both groups are not strong. With the Zinwell LNB help this problem?
Thanks

Views: 36

Reply to This

Replies to This Discussion

Hi

Please have a read on these articles https://freeviewforum.co.nz/forum/topics/freeview-satellite-alignin... and https://freeviewforum.co.nz/forum/topics/freeview-satellite-adjusti... 

Could possibly be how the dish is aligned. 

Kind Regards, Josh

Reply to Discussion

RSS

Latest Activity

Richard Warlow posted a discussion

Panasonic DVR Recorders - Loading Problem

I was wondering when the loading problem is going to be fixed on the Panasonic DVR Recorders?There…See More
18 hours ago
Cliff Baker replied to Cait's discussion Freeview on demand no longer working
"Also on the Network status page "
yesterday
Cliff Baker replied to Cait's discussion Freeview on demand no longer working
"Same problem with my 2015 Sony Android tv. From geekzone there is a problem with the On Demand app…"
yesterday
Biggles replied to Kane's discussion No TV1 TV2 Duke or Prime
"Try Manual Tune on the appropriate MUX and check signal strength. Most likely an antenna/cabling…"
yesterday

Connect With Us!

© 2018   Created by Bel @ Freeview.   Powered by

Badges  |  Report an Issue  |  Terms of Service