I have the above tv running off the uhf aerial, and there's 2 other tvs running off the splitter, other two tvs are fine.
When tuning the dtv freeview chanels, it's only finding Chanel 1, 2 ,1+1, 2+2, Duke and Duke +1. It's actually finding 12 channels, but possibly they are double ups, but only shows the 6 channels in channel manager.
In the past I'm sure it had found around 18 or more channels.
Have you tried disconnecting the other 2 TV's and then tune in the Veon to see if that will pick up all the required channels and then reconnect the other 2 to find out what will happen .
And does you splitter box have power running through all the ports ?
This is a photo of one splitter, I'm thinking it's a wrong type of one for my application? As no power pass on all ports?