Replies to This Discussion

Permalink Reply by forumuser on June 14, 2016 at 19:05

Good Evening Jane

LG TV: Please follow these instructions here to get Prime back on your LG TV

Matchmaster: Please follow the instructions here: (Download) http://matchmaster.co.nz/_literature_114478/13MM-DSR15_Retune_Flyer ;

Kind Regards
Josh 

Permalink Reply by Jane Dick on June 14, 2016 at 19:43

Thanks Josh managed to change the TP but when I pressed OK to save the box comes up with TP already exists please see picture. Can you tell me what to do from here please as I have searched the entire progrmmme list and prime isn't there.
Many thanks Jane

Attachments:

• image.jpg, 1.1 MB

Permalink Reply by forumuser on June 14, 2016 at 20:09

Hi Jane

Please go back to the TP List and find something looking like 12519 H 22500 , There should be an option to scan for the channel it's either of the colour buttons. 

Jane Dick said:

Thanks Josh managed to change the TP but when I pressed OK to save the box comes up with TP already exists please see picture. Can you tell me what to do from here please as I have searched the entire progrmmme list and prime isn't there.
Many thanks Jane

Permalink Reply by Jane Dick on June 16, 2016 at 19:00

Hi again Josh saying that "no program found" help!!!

Josh Hill said:

Hi Jane

Please go back to the TP List and find something looking like 12519 H 22500 , There should be an option to scan for the channel it's either of the colour buttons. 

Jane Dick said:

Thanks Josh managed to change the TP but when I pressed OK to save the box comes up with TP already exists please see picture. Can you tell me what to do from here please as I have searched the entire progrmmme list and prime isn't there.
Many thanks Jane

Permalink Reply by Paul on June 17, 2016 at 13:55

 

PRIME RETUNE INSTRUCTIONS
• With your TV turned on to the correct input to watch your DSR15,
turn on the DSR15.
• Once you are viewing a normal TV channel press “Menu”
on your remote.
• Using the down arrow button on your remote go to the
“Installation” icon and press “OK” on the remote
• Tab down until the “TP list” is highlighted and press “OK”

    Select 12519MHz   22500KS/s   H  (If this is available)

• Now press the BLUE button which is located near the bottom
of the remote
• An onscreen box will appear and the “OK” prompt will be
highlighted, ensure that the lines read:
• FTA only…..Yes        (Try changing to ALL or Full)
• Scan channel….. TV & Radio
• Network search….. No   (Try changing to On)
• Once you have checked that the prompts above are correct,
press “OK” on the remote and the receiver will now be
doing the search
• Once the search is complete go back to the “Main Menu” and
highlight “ Edit Channel List” and press OK
• Follow the onscreen prompts to move the new channels around
until they are in the order you want and save the channel line up