Replies to This Discussion

Permalink Reply by Paul on July 6, 2016 at 13:45

Scan for TV3

On your remote press Menu

Use the arrow keyS to select Installation

Then use the right arrow key to select the 2nd column and then select Manual Scan

Use the down arrow to select frequency select 12.456Ghz  using the the left right arrow keys.
Press Ok button to scan.

Deleting unwanted Channels

From the MAIN MENU scroll left and highlight CHANNELS and press the OK button
The receiver will request a password. Enter 9402 or if that does not work try 0000
Next highlight DELETE CHANNELS and press the OK button
Next scroll through the channel list and press the OK button on all the unwanted channels in the list
all the unwanted channels should have an X in front of them.
When you are finished press the EXIT button on the remote and the receiver will display a message
“Warning! Do you want to delete” Highlight YES in yellow and press the OK button
the receiver will exit out of the delete channel menu.

Grouping your favourite channels together in the channel list

From the MAIN MENU scroll UP highlight MOVE CHANNELS and press the OK button.
Next scroll through the channel list and press the OK button on the channel that you would like to move.
Now scroll UP or DOWN and move the channel to where you would like it to appear in the list and press OK.
Continue this with the various channels until you are satisfied with the list.
Once you are finished press the EXIT button on the remote and the receiver will display a message
“Settings were changed DO YOU WANT TO SAVE? Highlight YES in yellow and press the OK button.
Now press the EXIT button twice

• ▶ Reply

Permalink Reply by Sarah Jane on July 6, 2016 at 21:59

Thank you so much, it's working much better now, much appreciate!

• ▶ Reply

▶ Reply to Discussion