lost channels 1 and 2

Hi, I have a S7070R and have lost channels 1, 2 tv1+1 and tv2+1 after re tuning my receiver to receive Prime. Can anyone help me in getting these channels back?

Did this help? Click to mark!

0 members promoted this

Replies are closed for this discussion.

Replies to This Discussion

Permalink Reply by Paul on November 17, 2013 at 12:00

Press the Menu button to bring up the main menu
Select Installation and press OK
Select Tuning Wizard and press OK
Enter the PIN code for the unit (the default is 0000)
Select Satellite Scan and press OK
Press the Yellow button and select LNB Setup press OK

What numbers are showing under Low High ?

Defaults for a 11300 LNB

Low 11300

High 11300

22K Off

DisEqc None

Tone Burst None

Positioner None

Power On

Permalink Reply by Simon Miller on November 17, 2013 at 15:12

Low is 10745 and High is 10745

Paul said:

Press the Menu button to bring up the main menu

Select and press OK

Select Tuning Wizard and press OK

Enter the PIN code for the unit (the default is 0000)

Select Satellite Scan and press OK

Press the Yellow button and select LNB Setup press OK

What numbers are showing under Low High ?

Defaults for a 11300 LNB

Low 11300

High 11300

22K Off

DisEqc None

Tone Burst None

Positioner None

Power On

Permalink Reply by Paul on November 17, 2013 at 15:24

That setting is usually only chosen if your lnb is drifting try 10750 Low 10750 High.

Then do a rescan.

Is your STB a S7070r or a S7070.

S7070r

Permalink Reply by Simon Miller on November 17, 2013 at 15:35

Its a S7070r I had reception earlier but it has gone again, that was with the Low, High settings at10745

Paul said:

That setting is usually only chosen if your lnb is drifting try 10750 Low 10750 High.

Is your STB a S7070r or a S7070.

Permalink Reply by Paul on November 17, 2013 at 16:05

I think your LNB is past its best buy date.

You could try 10740 or 10760 but if its wandering that much it will eventually fail.

Look here for more info.

Permalink Reply by Simon Miller on November 17, 2013 at 16:39

Its not that old was only purchased brand new about 9 months ago? I have tried a mates old Freeview box and had no problems with reception, but had no Prime

Paul said:

I think your LNB is past its best buy date.

You could try 10740 or 10760 but if its wandering that much it will eventually fail.

Look here for more info.

Permalink Reply by Paul on November 17, 2013 at 16:45

You purchased the dish 9 months ago ?

The most common LNB are 10750 and 11300 the S7070R is set to 11300 by default.

Permalink Reply by Simon Miller on November 17, 2013 at 16:55

Roughly about that time frame from Dick Smiths and installed by an approved installer

Paul said: