LNB info

We recently got the Dish TV S8200 sat box and have a problem with channels 9,10 and 11 taking about 40 seconds to load. Dish TV support suggested replacing the LNB because the current one we have was installed by a Sky TV technician a couple of years ago, and the brand they use deteriorates over time. So I looked on Trade Me and there are so many listed with different specs I don't even know where to start and what is required for our set up. Can someone please offer advice?

Thanks in advance
Lani

Did this help? Click to mark!

0 members promoted this

▶ Reply to This

Replies to This Discussion

Permalink Reply by Dixon Wehi Titore on August 29, 2015 at 18:54

Hi ,

if you are going to diy this. Get a lnb 10750 which is what sky use. make sure you get the brackets for the lnb brand so in will fit on to your sat dish. Good Luck.

Dix. Northland

▶ Reply

Permalink Reply by Lani on August 30, 2015 at 8:01

Thanks and yeah we are going to diy it. When you say get a LNB 10750 you are just meaning get one with that frequency right? There aren't different makes/models I should be looking out for?

▶ Reply

Permalink Reply by Biggles on August 30, 2015 at 10:32

There's many brands and types available. Something like this should be OK.

http://www.freeviewshop.co.nz/noise-10750-band-p-624.html

Just make sure when ordering that it will fit the standard Sky mounting bracket. The supplier will know this. If it doesn't fit then you need a new bracket as well.