How to receive Prime / Bravo Plus1/ on a Hills HSMX-200 Satellite Receiver with 11300MHZ LNB

You will need to use your Hills Remote.

Tested numerous times on with 2 different 11300MHZ LNB's and Hills HSMX-200 Satellite Receiver with latest firmware v1.23

RESET FACTORY DEFAULT

1. Press Menu on your Hills remote

2. Use the Right arrow on your remote to select System

3. Use Down arrow key to select Set Default

4. Press Enter key

5. Enter 0000  Using number keys

6. Use Down arrow key to select Yes

7. Press Enter key

8. Select *Auckland* as(City Name) Using Right/Left arrow key

9. Use Down arrow key to select Start scanning

10. Press Enter key

If you want the *New* Prime /  Bravo Plus 1 / The Edge

This works with only 11300Mhz LNB's on your Satellite Dish

FULL SCAN

1. Press Menu

2. Use Right arrow key to select Setup

3. Use Down arrow key to select Antenna Setup

4. Press Enter key

5. Enter 0000  Using number keys

6. Use Down arrow key to select Scan

7. Press Enter key

8. Use Down arrow key to select Scan method

9. Press Enter key and use Up arrow to select Full Scan

10. Press Enter key

11. Use Down arrow key to select Start scanning

12. Press Enter key

13. Window will appear asking "Delete all existing channels and recording schedule?

14. Use Down arrow key to select Yes

15. Press Enter key

The Hills HSMX-200  will start scanning and find the new channels.

The Hills HSMX-200 will start scanning and find the new channels.

Once completed successfully, you should have uninterrupted viewing on all channels.

I'm sure hills will be sending me a cheque sometime soon :)